Captiveworks Cw 600s Premium Bin Files

Posted on Tuesday, November 04, 2008 - 19:22 GMTPlymouth, As I informed you before: Loading the wrong bin file resulted in 0000 on the receiver display and a green TV screen. Both the forwarded factory file and bin file 2.05 were loaded, as advised. The video image consists of colors scattered all over the screen 2. Pressing 'Menu' on the remote control switches the receiver off 3.

May 20, 2010 - Fta Bin Numbers Captiveworks - The Lee Griffiths Website. FTA Files for the Captiveworks CW 600s Satellite Receiver: The CaptiveWorks. Place, Good FTA is your premier source for the latest FTA Keys and FTA Files.

Pressing 'EPG' produces a PIP screen 4. No list appears on pressing 'FAV' Hope this additional information will assist in finding a solution. Appreciate your support. Please advise. Regards, Eugene. Posted on Tuesday, November 04, 2008 - 19:45 GMThey young albert try this it may help.courtesy of crazyfta.net CaptiveWorks CW-600S - Loaded Wrong Bin File Problem - Repair Guide What to do when you accidentally loaded the wrong bin file. CaptiveWorks receivers are very forgiving.

Either the CaptiveWorks CW-600S or the CW-600S Premium can fix itself. Just do the following. STOP - Do NOT try to put the correct bin on anymore. Power off the receiver from the rear power switch. Turn on the power ON from the rear AND at the same time hold in the front power button for 5 seconds. The receiver will display 'BOOT' and it is now in boot mode.

That is what we want, and you can let go off the front power button when this is displayed. Now, load the factory bin file.

Next, Load the CORRECT new bin file this time. Activate patch. (F1 and 000) 7. Setup dish antennas and scan channels. Nimora nimora song free download. There you go, your CaptiveWorks CW-600S receiver is now back up and running!!

Here is a how to. This refers to older bins and software. You must install the new and updated software. The Complete CW600S How To I have to thank all the people who have written and compiled all the previous How To's because the bulk of my learning experience has come directly from their threads. Thanks to mrokarvi, fun4me, skittles, and Captive Works.

Without your experience, understanding, and patience, countless numbers of people would be stuck wondering how to fix their STB's. ABSOLUTELY FIRST AND FOREMOST Captive Works Released 2 versions of the CW600S, a standard receiver and a Premium receiver. THIS HOW TO IS ONLY FOR STANDARD RECEIVERS! Loading any standard receiver files to your premium receiver can possibly damage the receiver beyond repair.

To identify what type of receiver you have, look at the front panel on the right hand side of the receiver. You should see the CaptiveWorks logo followed by CW-600S.

If you have a PREMIUM receiver, then you will see the word PREMIUM under the CW-600S. If the word PREMIUM is not found on the front right side of the receiver then you have a standard receiver and you can continue with rest of the How To. If you have a PREMIUM receiver, then you need to check the How To 's in the PREMIUM section found here. HXXp://forums.f2atv.com/forumdisplay.php?f=677 DO NOT SKIP THIS STEP! If you do not have the proper cable, then no amount of setting changes or software will allow you to download the updates you need. The serial cable you need is called a Null Modem Serial Cable. This cable uses the serial comm port on your computer.